NoLi Cat DIY

1) Cut the wood to the same size as the picture. The thickness is 12mm 2) Fix the woods with adhesive as shown below. Set the distance between the woods considering the bottle you will be using. In my case, it's 240mm. 3) Make a hole (Diameter : 9mm) on the side of the bottle. I recommend a point that balances the weight of both sides of the hole.  (Bottle size : Diameter 60mm, Length : 190mm) 4) Make a hole in the bottle cap. Set the hole size according to the snack your cat eats. In my case, it's 12mm. 5) Connect the bottle and the support. 6) Let's play with cats!!

1) Cut the cardboard to the same size as the picture. The thickness is 5mm and use two layers where you need support. 2) Fix the cardboard with the glue gun as shown below. 3) Wrap the rope around the cylinder (50mm in diameter, 295mm in height, 4) Fix both ends of the cylinder with the cardboard and stand in a cathouse. 4) Install an acrylic hemisphere on the right column. http://itempage3.auction.co.kr/DetailView.aspx?ItemNo=A757530495&frm3=V2 5)  Install stairs. 6) Intstall the bridge. 7) Install the fence and cat toys. 8) Let's play :)

1) Cut the wood to the same size as the picture. The thickness is 12mm. Only wood that has a small hole is 9mm. 2) Fix the wood with a bond. 3) Assemble suction cup. Suction cup :  https://smartstore.naver.com/spiderock/products/3858737068?NaPm=ct%3Dk2l9qv7r%7Cci%3Dcheckout%7Ctr%3Dppc%7Ctrx%3D%7Chk%3D13c1e48cc0a5111308cfb0a547bb623684af9dee 4) Drill holes in the front of the hammock and attach the string. Attach the suction cup to the other end of the string. 5) Fix the hammock on the window. 6) Put acrylic hemisphere on the hammock. Hemisphere : http://itempage3.auction.co.kr/DetailView.aspx?ItemNo=A757530495&frm3=V2 7) Give your cat a comfortable hammock :)

1. Support part 1)  Cut the woods  to the size shown below. (Thickness: 12mm ) 2) Fix the wood around the copper rod. (copper rod diameter: 22mm)    3) Pass the magnet through the copper rod. (Magnet diameter 40mm, 23mm hole) Magnet :  http://shopping.interpark.com/product/productInfo.do?prdNo=967277567 2. Seat part 1)  Cut the woods  to the size shown below. (Thickness: 12mm ) 2) Make a hole in the wood and tie the thread. Tie a magnet to the other side of the thread. This is used as a seat belt. (Magnet diameter: 12mm) Magnet :  http://shopping.interpark.com/product/productInfo.do?prdNo=967277567 3) Fix the woods like this. And fix  the magnet on the top and bottom of the chair. It is used as a brake system. 3. Lifter Part 1)  Cut the woods  to the size shown below. (Thickness: 12mm ) 2)  Fix the woods lik...