NoLi Cat DIY

  1) Cut the wood to the same size as the picture. The thickness is 12mm. 2) Fix the woods with the glue as shown below. 3) Next, make a pillar. 4) Fix the cylinder between the columns. And wrap the rope around the cylinder for using it as a scratcher. 5) Make the second floor. The longest wood is 30 mm thick. 4) Install a hammock. 5) Place an invisible hemisphere on the third floor. The room size on the 3rd floor is the same as the 1st floor. http://itempage3.auction.co.kr/DetailView.aspx?ItemNo=A757530495&frm3=V2 6) Install a ladder. But my cat didn't use this. (260mm x 836mm) 8) Let's play :)

1) Cut the wood to the same size as the picture. The thickness is 12mm 2) Fix the woods and cat toy with the wood needle.  3) Fix the woods with screws 4) Pass the wooden rod through the hole to connect the cat toy part with the wood box part.   4)  Cover the top plate with five holes.

1) Cut the wood to the same size as the picture. The thickness is 12mm 2) Fix the woods with adhesive or screw.  3) Put a table tennis ball in the box. And call your cat :)

1) Cut the wood to the same size as the picture. The thickness is 12mm 2) Fix the woods with adhesive as shown below. Set the distance between the woods considering the bottle you will be using. In my case, it's 240mm. 3) Make a hole (Diameter : 9mm) on the side of the bottle. I recommend a point that balances the weight of both sides of the hole.  (Bottle size : Diameter 60mm, Length : 190mm) 4) Make a hole in the bottle cap. Set the hole size according to the snack your cat eats. In my case, it's 12mm. 5) Connect the bottle and the support. 6) Let's play with cats!!