How to make a cat trap








1) Cut the woods to the size shown below. (Thickness : 12mm)


2) Make a hole in the side wall to install the door.

3) Assemble the floor, side, and back using screws or adhesives.


4) Attach a short bar to acrylic to use as a door. (Acryl size 250 X 265 X 2 mm(


5) Assemble the door and attach the remaining side and top.



6) Attach the stopper to prevent the door from opening in the direction that the cat comes out.


7) Let's put the food inside and wait. It is very useful when you want to take a cat to a hospital or catch it for giving medication.



Comments

Post a Comment

Popular posts from this blog

DIY Cat Exercise Wheel

Image
[DIY Cat Wheel] 1. Wheel Part 1) First cut the wood to the same size as the picture. The thickness is 15mm. 2) Fix the wood with a bond. Make the shape of circle as possible. 3) Fix it with screws once more. 4) Fix the cat carpet with screws. If your cat is familiar with wood, you can skip the carpet. 2. Support Part 1) First cut the wood to the same size as the picture. The thickness is 15mm. 2) Fix the wood with screws as shown below. The position should be set according to the urethane wheels you want to use. 3) Fix the urethane wheels to support the weight of the catwheel. 4) Fix the side wheels. This wheel prevents the catwheel part and the support part from rubbing when the catwheel is moved in the horizontal direction. If there is no wheel, the part marked in red is rubbed. 3. Things to Improve 1) I want to change the thickness of the wood to 12mm. 15mm is too heavy. 2) I want to reduce the width of th
Read more

DIY Whack a Mole Cat Toy

Image
1) Cut the wood to the same size as the picture. The thickness is 12mm 2) Fix the woods and cat toy with the wood needle.  3) Fix the woods with screws 4) Pass the wooden rod through the hole to connect the cat toy part with the wood box part.   4)  Cover the top plate with five holes.
Read more

How to make a wooden ferris wheel

Image
1. Wheel part 1)  Cut the woods  to the size shown below. (Thickness : 12mm  , Main rim is 15mm) 2) Prepare motor hub and shaft. - Motor hub :  http://www.devicemart.co.kr/goods/view?no=1321129 - Shaft :  http://www.devicemart.co.kr/goods/view?no=1342501 3) Fix motor hub to wood, using glue gun. 4) Drill the center. (D3) 5) Fixed motor hub to shaft, using screw. 6) Drill the side of wood (D8) and insert wood stick. 7) Drill the side of  main rim and insert shaft part 8) Make a another wheel and fix them, using wood stick 2. Support part 1)  Cut the woods  to the size shown below. (Thickness : 12mm) 2) Make a hole to wood (390 x 60 wood , D37, Distance from edge to center is 55mm) 3) Fix the woods as process s hown below. (using  Woodworking bond) 4) Fix motor braket and motor. - Motor :   6V, Torque : 1200gf.cm , Rpm : 16   http://www.devicemart.co.kr/goods/view?no=1
Read more