DIY Cat Exercise Wheel

[DIY Cat Wheel]


1. Wheel Part

1) First cut the wood to the same size as the picture. The thickness is 15mm.


2) Fix the wood with a bond. Make the shape of circle as possible.


3) Fix it with screws once more.



4) Fix the cat carpet with screws. If your cat is familiar with wood, you can skip the carpet.



2. Support Part

1) First cut the wood to the same size as the picture. The thickness is 15mm.




2) Fix the wood with screws as shown below. The position should be set according to the urethane wheels you want to use.


3) Fix the urethane wheels to support the weight of the catwheel.




4) Fix the side wheels. This wheel prevents the catwheel part and the support part from rubbing when the catwheel is moved in the horizontal direction. If there is no wheel, the part marked in red is rubbed.



3. Things to Improve

1) I want to change the thickness of the wood to 12mm. 15mm is too heavy.
2) I want to reduce the width of the catwheel. For my cats, 300mm is enough.
3) The part where catwheel and urethane wheel meet is not perfect circle. Movement is not smooth when the urethane wheels pass through the wood gaps. If you wrap the catwheel like a rubber band once, it seems to move much more smoothly.





Comments

  1. Hello, are you able to tell me what is the total cost of the materials?

    ReplyDelete
    Replies
    1. hi. i just estimated materials at about £100 in the UK. including 12mm hardwood plywood from B&Q, screws, thin carpet, good quality wheels with good bearings. i estimated that it will take me about 12 hours to build.

      Delete
  2. What size wheel did you use please

    ReplyDelete
  3. Replies
    1. this looks like 12 or 14 mm plywood hardwood

      Delete
  4. Could you please provide some more detailed blue prints?

    ReplyDelete
  5. what measurements are those on the blueprints? I don't recognize them.

    ReplyDelete
  6. Hi , please , can someone tell me the measurements of the 40 wood cuts please , I can’t understand this �� sorry for my English i speak Spanish

    ReplyDelete
  7. What did you use to wrap the cat wheel with to make it move more smoothly in the wheels?

    ReplyDelete
  8. To make it, you need to buy a veneer sheet 1250x2500, because otherwise how to cut those big circles?

    ReplyDelete
  9. Hey! This is a super work ��
    I just wanted to know where did you found the wood circles for the wheel and the support part?
    Thx!

    ReplyDelete
    Replies
    1. I made a jig for my hand router fixed to a centre point and the router on the other end and just move the router in a circle. Have to first set the router bit not too deep and then rout a second time through. Works perfect!

      Delete
  10. It is a very good work. Thanks. I have a few questions.
    1- What are the dimensions of 40,55mm for? Is it for cats?
    2- What is the size of the wheels you use?
    3- At what height did you fix the wheels?
    4- How about 600mm size do you think?

    ReplyDelete
  11. hi, what is the length from the center of the circle to the edge? also known as the radius of the circle. also what is the length x width of the wooden panels? thank you for your time

    ReplyDelete
  12. Hi

    Does anyone know where I can buy the small casters/wheels and also the height/size of the 10 small casters/wheel? Thanks

    ReplyDelete

  13. Este es un proyecto muy bonito. Escribiste que ibas a utilizar madera más fina. ¿Esta mejor ahora? ¿Encendedor? ¿Recomiendas alguna otra cosa para mejorar? Gracias

    ReplyDelete

  14. Este es un proyecto muy bonito. Escribiste que ibas a utilizar madera más fina. ¿Esta mejor ahora? ¿Encendedor? ¿Recomiendas alguna otra cosa para mejorar? Gracias
    Martin_gent2006@hotmail.com

    ReplyDelete

Post a Comment

Popular posts from this blog

DIY Whack a Mole Cat Toy

How to Make a Cat Tower